Coffin r56

DOM

Active Member
Jun 16, 2019
435
123
43
Würges
fuck.com
I have tried Coffin r56 using FS-UAE with a MAC...

If you wanted to test it too, you will need:

1. The image...
2. Write the image to a usb stick. (f.e PiBaker or w32diskimager for MAC/Win)
3. Open Terminal:
4. Type diskutil list
5. Look for the 32GB stick (f.e disk2)
6. Type: sudo chmod a+rw /dev/disk2 ( to enable read & write)
7. You will need your password for this...
8. Start FS-UAE
9. Settings: CPU 68040, Mem=what you want, ROM=3.1, GFX=UAEGFXZ3
10. Save the Config
11. Open Config with the Editor
12. Insert:
hard_drive_0 = /dev/disk2
hard_drive_0_type = rdb
13. Save the file
14. Click again on your Config (FS-UAE)
15. Goto drives and check if the drive is listed as disk2 (or what ever you get with diskutil list)


Why 68040?
- Open DOpus goto Libs and you will see...

With Windows should be the same, figure out which drive is your stick...

5137


I can upload a hdf file but without games, music, video, pictures but fixed it to use 68060 for UAE.

Pictures fe. Umbuntu & mobile, mp3 (nothing special), Games (whdload), video can be downloaded everywhere...
 
Last edited:
  • Like
Reactions: mlawatia

Pinkduck

New Member
Jun 7, 2020
2
0
1
41
FS-UAE has the advantage that the original .img can be used directly, there is no need to use another card or flash drive. Unfortunately, the speed in the FS-UAE is strange.
 

DOM

Active Member
Jun 16, 2019
435
123
43
Würges
fuck.com
FS-UAE has the advantage that the original .img can be used directly, there is no need to use another card or flash drive. Unfortunately, the speed in the FS-UAE is strange.
FS-UAE has the advantage that the original .img can be used directly, there is no need to use another card or flash drive. Unfortunately, the speed in the FS-UAE is strange.
It depends on the image...
I try coffin55 &56 and it don`t boot with the image...

But if you write it to an usb drive you can start with both FS/WinUAE...
 

DOM

Active Member
Jun 16, 2019
435
123
43
Würges
fuck.com
If the image not working oick the hdf files and include it to a PI image... But anyway i don`t have an PI to test it...