DOM

Well-Known Member
Jun 16, 2019
821
343
63
Würges
fuck.com
MHD0 and MHE0 are the MAC & PC drives (located in dosdrivers & startup-sequence)
---> http://amigawarez.com/index.php?resources/os-part-two-mac-pc-part-uae-hdf.200/
if you don`t use it, you should delete the files...
if you want to use the mac/pc drives, the unit number should be the same as the one in the dosdrivers...
You can check you config with the Mounter program...

- Can't put 16bit color depth...
If you use the new System One, you can change the picassomode definition and try it
5750
Rename PicassoSettings_higher_res to PicassoSettings...
(make a backup or rename the original...)
 
  • Like
Reactions: Jupy

Jupy

Member
Dec 19, 2020
47
3
8
43
Sooo...
- i renamed PicassoSettings_higher_res to PicassoSettings, changed picasso mode in true color but your scrrenshot are more "antialiased" and the arrow of the windows are green/blue :oops:
- mounted Work drive with cyberstorm controller and in Mounter tool it shows me that the drive is 1Gb and ready, but the icons still the same (f****d!)

(sorry for bothering, man!)

Immagine 2021-01-26 204948.jpg
 

Enigma776

New Member
Nov 26, 2017
16
0
1
37
Sooo...
- i renamed PicassoSettings_higher_res to PicassoSettings, changed picasso mode in true color but your scrrenshot are more "antialiased" and the arrow of the windows are green/blue :oops:
- mounted Work drive with cyberstorm controller and in Mounter tool it shows me that the drive is 1Gb and ready, but the icons still the same (f****d!)

(sorry for bothering, man!)

View attachment 5751
I had to change the CYBPPC.device to ID 3 in DEVS\DOSDRIVERS\MHE0 once I did that everything was ok, did need to change shapeshifter to Unit 3 also.
 

DOM

Well-Known Member
Jun 16, 2019
821
343
63
Würges
fuck.com
1. You can change the color with the program GUI (--> Prefs > GUI).

5753


2. The Work drive is on your Config the unit number 5 - you should change the dosdrivers MHD0 & MHE0 !

Unit = 5


5752


Info: The Unit number 0 is 1...

If you want to start the the the MAC emulation (Shapeshifter/Fusion) you simply select your "new" drive too...
 
Last edited:
  • Like
Reactions: Jupy

DOM

Well-Known Member
Jun 16, 2019
821
343
63
Würges
fuck.com
Since some people had accessed the file when uploading it, it is simply junk. I will do it again tomorrow as I had an annoying day today.... o_O
 

odenko

New Member
Sep 1, 2020
19
3
3
60
Sooo...
- i renamed PicassoSettings_higher_res to PicassoSettings, changed picasso mode in true color but your scrrenshot are more "antialiased" and the arrow of the windows are green/blue :oops:
- mounted Work drive with cyberstorm controller and in Mounter tool it shows me that the drive is 1Gb and ready, but the icons still the same (f****d!)

(sorry for bothering, man!)

View attachment 5751
 

odenko

New Member
Sep 1, 2020
19
3
3
60
Sooo...
- i renamed PicassoSettings_higher_res to PicassoSettings, changed picasso mode in true color but your scrrenshot are more "antialiased" and the arrow of the windows are green/blue :oops:
- mounted Work drive with cyberstorm controller and in Mounter tool it shows me that the drive is 1Gb and ready, but the icons still the same (f****d!)

(sorry for bothering, man!)

View attachment 5751
Had the same problem.
In Winuae I use now System.hdf on uae0
Work.vhd on DH1 scsi2 Cyberstorm PPC 1
and then the other 2.
I have no idea why. But when work.vhd is on an other SCSI port its not working.
So try this.
For me it works even with Winuae 4.40.
 
  • Like
Reactions: Jupy

DOM

Well-Known Member
Jun 16, 2019
821
343
63
Würges
fuck.com
OK i replaced all stuff on a new HDF and now it works with WinUAE 4.3 - 4.5 Beta 11 (FS-UAE had no such problems)
The colors are different too...

I will upload the file tomorrow...

5755
 
  • Like
Reactions: Jupy

Jupy

Member
Dec 19, 2020
47
3
8
43
Everything is perfect now, thanks Dom
Just to let other people know: by default the work drive is set on 1
Waiting for the new version tomorrow!
 

DOM

Well-Known Member
Jun 16, 2019
821
343
63
Würges
fuck.com
The normal WinUAE config should be:

1 SystemOne
2 Work
3 Appz
4 Games
etc

(All cyberppc - with your VHD file it depends on the UAE Version sometimes it works with uae and with pfs2aio as filesystem (you can select it))

The problem was the PFS drive and there are some important files missing... (i should not start FS & WinUAE at the same time...:oops: )

Anyway the new one is coming...
 
  • Like
Reactions: Jupy

Jupy

Member
Dec 19, 2020
47
3
8
43
So here we are!
Tested a bit the new version and works like a charm! (tried also the new screen mode). a HUGE and great work, Dom! Thank you so much!
No more stack alerts, colors are great and tried some apps again and even dpaintV starts fine (in the previous version gave me an error).

Let's come to the annoying questions (that I do for me and hope to be helpful for your work, Dom!) :

- It is normal the screen mode request on every startup?
- with the new screen mode, if i choose "screen mode" and then 1680x1050x32 all works fine, but in prefs/screen mode is not setted properly
- I choose 1600x1050 and put the same resolution in winuae window settings, but it switch in 1680x1050 in both screen mode and winuae window settings
- in Picasso Mode (both normal and high res) the "closest" resolution is 1648x1028...it is normal?
- Sgrab ppc and skulpt 3d ppc don't start because it not find the "powerpc.library"
- if i doubleclick on "ibrowsemi.readme" inside the ibrowse 2.3 drawer, it asks me to mount dopus5, then cancel and then error "impossible to open the program Dopus5:C/dopus_dclick
- as you can see in the screenshot, everythings looks nice, but when i open any system windows, fonts look like with "interpolation/non native resolution" artifacts, what i did wrong?

these are the problems/issues/strange things i met until now (most of all because of my fault, I'm sure and I apologize)

Then I just have to find an ibrowse 2.5 key, italian/english translations for some apps and find a way to set real3d screen mode as workbench :oops:

Thank you again Dom and please do not get me wrong, take these question as they are, trying to be helpful for me and (hopeful) for your great, great work!Immagine 2021-01-27 174538.jpg
 

DOM

Well-Known Member
Jun 16, 2019
821
343
63
Würges
fuck.com
-> - It is normal the screen mode request on every startup?
YES and NO

Use the SystemOne Prefs -> Prefs or from menu or from -Control (wbdock)--->

5761

------>

5762

and you should select " Save Your Config" and the requester is gone....


-> ...closest" resolution is 1648x1028...it is normal?
I made the resolution with my Laptop.
The problem is, that you create a mode for P96 but on other systems it will be different...

-> - Sgrab ppc and skulpt 3d ppc don't start because it not find the "powerpc.library"
PPC is not activeted... -> Prefs -> WarpOS (is deactivated) but beware of activate it, you will get more errors and reboots...
(Question from me: were i have SGRAB PPC?)

-> ibrowse 2.3 drawer...
(Question from me: were i have the IBrowse2.3 drawer - i have a 2.3 version to crack the 2.4 version to use it without key... )

-> real3d
I know real3d works on Workbench but i don`t remember. Maybe i will find an old backup of Real3d from me...

la mia moglie italiana urla che la cena è pronta o ci saranno delle botte...
 
  • Like
Reactions: Jupy

DOM

Well-Known Member
Jun 16, 2019
821
343
63
Würges
fuck.com
Fonts:

I mostly work privately with a MAC, since I otherwise have to deal with Windows professionally and I have hated it for 35 years... So I use FS-UAE and for me the font looks good, but you can set another one with -> Prefs > Fonts.

---> "ibrowsemi.readme"

Open DOpus and select the file and use the button Read file or change the Tooltype of the icon (Select file -> Workbench menu -> Icons -> Information
and change it like the picture or the program you want to use).


5763
 

DOM

Well-Known Member
Jun 16, 2019
821
343
63
Würges
fuck.com
---> -italian/english translations for some apps

Unfortunately, languages are not available for all programs.
A program to change languages is for example this one:

5764


if not, you have to change the program yourself (disassembler or Hex-Edit)... :( (like Twist)
 

Jupy

Member
Dec 19, 2020
47
3
8
43
la mia moglie italiana urla che la cena è pronta o ci saranno delle botte...

AHAHAHAH!
Run my friend, run! never argue with a screaming and upset italian woman :eek:

thanks for the answers...settings fixed, ibrowsemi.readme fixed and powerpc left deactivated!

(Question from me: were i have the IBrowse2.3 drawer - i have a 2.3 version to crack the 2.4 version to use it without key... )

Sorry, my bad...it's the ibrowse (2.4) drawer!

(Question from me: were i have SGRAB PPC?)

Inside the sgrab and skulpt 3d drawers

Immagine 2021-01-27 233639.jpg

Fonts:
I mostly work privately with a MAC, since I otherwise have to deal with Windows professionally and I have hated it for 35 years... So I use FS-UAE and for me the font looks good, but you can set another one with -> Prefs > Fonts.

Immagine 2021-01-27 233508.jpg

Immagine 2021-01-27 235214.jpg

as you can see in the screenshots it's just the fonts on/in some mui windows, it seems like some "resolution" issue, like "upscaling/downscaling" resolution. in the workbench windows (and inside ibrowse) fonts are fine, tryied to see some mui settings, but i didn't find anything...can it be because of the picasso resolution "difference"? (forgive me if i said a bullshit :oops:)
Is there a way for me to edit the picasso settings file to make it match with the screen mode?


---> -italian/english translations for some apps
Unfortunately, languages are not available for all programs.
A program to change languages is for example this one:

Thanks! Good to know! I have a lot of the apps in italian, otherwise i will try the methods you told me!
 
Last edited:

triki

Member
Jul 18, 2020
51
8
8
48
Merci DOM, je télécharge. Quel travail, ça a l'air énorme, j'ai hâte de tester
 
  • Like
Reactions: DOM

DOM

Well-Known Member
Jun 16, 2019
821
343
63
Würges
fuck.com
You can set the resolution with Picasso96Mode (Prefs) and with the Icon ToolTypes.
First i would test it with BoardTyoe=uaegfx and the Settingsfile only.

If you want to create new screen resolutions, now comes the hard part. You have to delete or rename the settings file. Reboot and create a new one in PAL mode, or try it in active mode (without rebooting).
However, it is not easy to do this. Maybe I can find some help file for it.

5768

Hint: Use SGrab from Appz:gfx/GGrab...

And Ibrowse2.3 is not working with the IBrowse 2.4 drawer but it have the same keycode like IBrowse 2.4...
 

Jupy

Member
Dec 19, 2020
47
3
8
43
Thanks man...but it's too much! it's fine like that ;)
but it's sooooo strange that only mui windows are affected by this! don't know if it's some kind of antialias or other s**t like that!

And Ibrowse2.3 is not working with the IBrowse 2.4 drawer but it have the same keycode like IBrowse 2.4...

I said that badly, there are two ibrowse drawers one "normal" (the 2.4 version) and one "Ibrowse 2.5" that is uncracked/without key...and i was searching for the keyfile for the 2.5 version, but i suppose that if you didn't cracked/registered it, is because there is no keyfile yet for the 2.5 version